The TR-20 Interface Module provides a complete graphical interface to the U.S. Soil Conservation Service TR-20 hydrologic analysis model.
The TR-20 computer program
assists the engineer in hydrologic evaluation of flood events for use in analysis of water resource projects. The program is a physically-based event model which computes direct runoff resulting from any synthetic or natural
rainstorm. There is no provision for recovery of initial abstraction or infiltration during periods of no rainfall within an event.
The program develops flood hydrographs from runoff and routes the flow through stream
channels and reservoirs. Routed bydrographs are combined with those from tributaries.
Procedures for hydrograph separation by branching or diversion of flow and for adding baseflow are provided. The program uses procedures described in the SCS National Engineering Handbook, Section 4, Hydrology (NM-4) except for the reach flood routing procedure. The reach routing is described in Hydrology Note 2.
Peak discharges, their times of occurrence, water surface elevations and duration of flows can be computed at any desired cross section or structure. Complete discharge hydrographs, as well as discharge hydrograph
elevations, can be obtained if requested. The program provides for the analysis of up to nine different rainstorm distributions over a watershed under various combinations of land treatment, floodwater retarding structures,
diversions, and channel modifications. Such analysis can be performed on as many as 200 subwatersheds or reaches and 99 structures in any one continuous run.
The program was originally developed by the Hydrology Branch
of the Soil Conservation Service (SCS) in cooperation with the Hydrology Laboratory, Agricultural Research Service (ARS), through a contract with C-E-I-R, Inc. Numerous modifications and additions have been made since by the